Manual Angle Valves
Angle valve refers to the valve’s configuration, this type of valve typically has an inlet and an outlet that are at a 90-degree angle to each other. This design allows for easier installation when fitting in tight spaces or locations where a straight-line flow path is not feasible. Angle valves come in various sizes and designs, including manual, solenoid or pneumatic, which will be determined by your system design and the facilities that are available to the machine.
The PVMK is a quick acting, bellows sealed, right‑angled lever operated valve and is available with either an aluminium or stainless steel body. The lever, connected to a self lubricating plastic cam‑piston, actuates the valve stem and valve plate through PTFE bearings. The valve plate O-ring groove is vented to prevent gas bursts. The valves are designed to operate down to 10‑9 mbar/ 8 x 10‑10 Torr and up to a pressure of 2100 mbar/1575 Torr (30 psi).
Features & Benefits
- Easy to use
- Bellows sealed mechanism
- High conductance
Contact Engineering Team
Need a custom solution or technical consulting for your specific application? Our leads are ready to assist.